CPS - Products
 

 

Home

About CPS

Product Categories
   · Telephone Line Sharing
   · Dial Security
   · ReBooting &
      AC Power Control
   · Remote Switching
   · RS-232
   · Controllers
   · Software
   · 50 Products
   · Alphabetic Listing

Administrative
   · Ordering
   · Warranty
   · Discounts
   · Return Policy/Demos

Technical
   · Tech Tips
   · Wish List
   · Best Way
 

 

NETWORK CONTROLLER (N-RRC)

Provides Remote Network Control for Any of the CPS Rebooting Products (Base Units)

OVER THE NET or ANY TCP/IP NETWORK

 

N-RRC (Front)
N-RRC Picture
N-RRC (Back)
N-RRC Picture

 

SAMPLE BASE UNITS
ARR Picture

Intelligent AC Power Strip

PC-RJ Cable Interface Assembly Picture

PC-RJ Cable Interface Assembly

  More...

 

APPLICATION DIAGRAM

N-RRC Application Diagram


DESCRIPTION

  • RS-232 or Analog port interface to "Base Unit"
  • Easy Menu Screen Control Selections
  • Password protected
  • Automatic or Manual URL Setup
  • External Relay Control
INTRODUCTION
The N-RRC is a Web based network controller for any of the CPS remote rebooting products ("Base Units"). It connects to your Ethernet network like any other network device and acts like a mini web site. It can be accessed using any web browser.

It presents its menu to the system administration. Control is initiated simply by clicking on the CPS Base Unit that you have connected to it and selecting the action to take: (AC Power Base Units, ON/OFF/RESET/INQUIRY) - (Relay, ON/OFF). An acknowledgement page is returned.

SETUP
Several methods can be used to set the URL. The two most popular are to "Ping" the desired IP address or to enter it through the serial port from a terminal or a PC. It can also be entered automatically by connecting it to a network with a DHCP (Dynamic Host Configuration Protocol) server, or it can be factory hard coded for special applications.

The optional five-character password is entered through the serial port and can be changed remotely over the network as required.

CONNECTORS
In addition to the RJ-45 Ethernet connector, the N-RRC has a RJ-11 analog phone jack to provide connection to any of the CPS "Base Units". This can support cabling distances up to 2000'. Note: This is a "control port" and not used for telephone connections. It also provides a 5V to ground signal to control an external relay: yours (schematics supplied) or our Relay Box "Base Unit".

A DB-9 pin serial connector may be used for the set up purposes and/or to control "Base Units" that support direct RS-232 serial input ( IPC, IPN, APB).

Check the N-RRC Demo Page at http://www.cpscom.com/nrrc.


SPECIFICATIONS

TCP/IP NETWORK CONTROLLER (N-RRC)
Item No SWTRRC-N            Price $169.00 

Physical    4.5" W x 3.5" D x 1.5" H, .5 lbs.
Connectors  (1) RJ-11 Reset Control,
            (1) RJ-45 Ethernet,
            (1) DB-9 Male RS-232
LEDs        (4) Power, Mode
Switches    (1) 4-Bit Dip, (1) Pushbutton,
            (1) DCE/DTE Slide Switch
Bell        None
Cable       (1) 2' RJ-45 Ethernet Cable,
            (1) 6' DB-9 Female to DB-9 Male
Adaptor     None
AC Power    Wall Mount 9VAC 1A, 115V/60Hz

NOTE: For 220V/50Hz, add (-INT) to the Item No


------ NON-ADDRESSABLE BASE UNITS ------

OPTIONAL INTELLIGENT AC POWER STRIP
2 Controlled and 4 "Normal" Outlets
Item No SWTAC6-A2-2x4       Price $ 79.00

4 Controlled and 2 "Normal" Outlets
Item No SWTAC6-A2-4x2       Price $ 79.00

6 Controlled Outlets
Item No SWTAC6-A2-6x0       Price $ 79.00

Physical    12" W x 2.5" D x 1.5" H, 2 lbs.
Connectors  (2) RJ-11 TelCo/Control,
            (6) AC Receptacles
LEDs        (1) Surge Protection
Switches    (1) Main Toggle On/Off
Bell        None
Cable       (1) 5' RJ-11 Phone Cable
Adaptor     None
AC Power    115V/60Hz, 15 Amps

NOTE: For 220V/50Hz, see the IPC.


OPTIONAL INTERNATIONAL POWER CONTROLLER (IPC)
See the IPC


OPTIONAL PC-RJ CABLE INTERFACE ASSEMBLY
Item No CAPC2-RJ            Price $ 15.00

Physical    5.5" W x 2.5" D x .75" H, .25 lbs.
Connectors  (1) RJ-11 Interface,
            (4) PC Headers Pins
LEDs        None
Switches    None
Bell        None
Cable       (1) 2' M/F Reset Switch Cable,
            (1) 2' F/F Motherboard Reset Cable,
            (1) 5' RJ-11 Cable
Adaptor     None
AC Power    None


OPTIONAL RELAY BOX
See the Relay Box


-------- ADDRESSABLE BASE UNITS --------

OPTIONAL A/B, MATRIX or X2 SWITCH
See the AB-M


OPTIONAL INTELLIGENT AUTO PUSH BOARD (I-APB)
See the APB


OPTIONAL INTELLIGENT POWER NODE (IPN)
See the IPN

Computer Peripheral Systems, Inc.
5096 Bristol Industrial Way, Suite B
Buford, GA 30518
Sales
1-800-888-0051
8:30 AM - 5:30 PM EST
Technical Support
(770) 945-0643
8:30 AM - 5:30 PM EST
Fax
(770) 945-9342
E-Mail
sales@cpscom.com

© 1996-2010 Computer Peripheral Systems, Inc.
This file last modified December 1, 2010