| ||||||
|
Connects Two Standard Analog Phone Lines Together ... to allow calls on an alternate network Use with a Single Line Controller for dedicated applications or with a Three Line Controller for shared line or multi-network applications | ||||||
|
APPLICATION DIAGRAM
| ||||||
|
FEATURES
The PLC (POTS Line Coupler) provides all of the isolation required to couple two standard
POTS lines together. This provides a dial tone from the alternate line through a call on
the primary line. An alternate PSTN carrier can be used for the second call or any type of
alternate network base station (VoIP, GSM converter, GW) as long as it presents a POTS interface
to the caller. The unit is primarily designed for voice calls although modems may be used over
an alternate PSTN at a reduced data rate, about half.
Controller Required
The controllers initially answer the call on the primary line and control the PLC. They also
provide password protection as well as other programmable features.
The system is easy to use. Simply place a call to the number where the PLC/controller is connected
and enter your touch-tone password, if used. You will then be presented with a second dial tone
allowing you to dial over the alternate network.
If you are using the multi-port FTS, you would also enter a port number where other PLCs or
compatible terminating devices are connected.
Example
In the event that a number is miss-entered, you would hang up and try again. Hang-up supervision on the alternate line is handled by the controller and the PLC. These touch-tone commands can be entered manually or appended to the AT dial string.
SPECIFICATIONS POTS LINE COUPLER (PLC) Item No SWTPLC Price $ 79.00 Physical 4.5" W x 3" D x 1.25" H, 1 lb. Connectors (2) RJ-11 Control/Secondary LEDs (2) Control/Secondary Connect Switches None Bell None Cable (1) 5' RJ-11 Phone Cable Adaptor None AC Power None -------------- CONTROLLERS -------------- SINGLE PORT REMOTE REBOOT CONTROLLER (SP-RRC) Item No SWTSPRRC Price $135.00 Physical 4.5" W x 3" D x 1.25" H, 1 lb. Connectors (2) RJ-11 TelCo LEDs (3) Power, Mode Switches (1) 4-Bit Dip, (1) Pushbutton Bell None Cable (1) 5' RJ-11 Phone Cable Adaptor None AC Power Wall Mount 9VAC 1A, 115V/60Hz NOTE: For 220V/50Hz, add (-INT) to the Item NoFLEXIE TELCO SWITCH (FTS) Item No SWTFTS Price $225.00 Physical 4.5" W x 3" D x 1.25" H, 1.5 lb. Connectors (4) RJ-11 TelCo LEDs (5) Power, Mode Switches (1) 4-Bit Dip, (1) Pushbutton Bell None Cable (1) 5' RJ-11 Phone Cable Adaptor None AC Power Wall Mount 9VAC 1A, 115V/60Hz NOTE: For 220/50Hz., add (-INT) to the Item No | ||||||
|
Computer Peripheral Systems, Inc. © Copyright 1996-2004 Computer Peripheral Systems, Inc. |
