Provides Remote Reset Control and Shares the Phone Line | |||||
APPLICATION DIAGRAM
| |||||
DESCRIPTION
The SP-RRC can be installed on any analog dial line and can share the line with
other normal voice, modem, fax or PBX requirements. The shared Default Port
supports the phone equipment and a Reset device simultaneously, if required.
It can also be used as a security device by simply using it to turn the remote
equipment, such as a modem, ON or OFF.
Note that the SP-RRC is a controller only. It has one RJ-11
port and requires a CPS Base Unit (such as an Intelligent AC Power
Strip or an RJ-Cable Assembly). They are connected to the SP-RRC
via the RJ-11 connector. They can be physically located locally or up to 2000'
from the controller, using standard phone or LAN cable.
The Intelligent AC Power Strip is normally used when the target machine
does not have a reset button or when direct power ON/OFF control is also required.
It has six AC outlets: two (2x4), four (4x2), or all six (6x0) may be designated
as "Controlled Outlets" at the time of the order. The others may be
used as normal surge protected AC outlets for printers, monitors or other
equipment that do not require resets or On/Off control.
The RJ-Cable Assembly allows the SP-RRC to perform a
push-button reset (soft reset) on a PC. To use it, the target machine must have
a Reset button that connects to the motherboard. It installs in a vacant I/O
opening on the back of the machine's case, but does not require a slot on the
motherboard. The connecting cables allow the Reset button to also be used normally.
ATX Motherboards
However, these motherboards can also be used with the Auto Push
Board (APB). The APB performs the first option above by pushing the Power Button
once AC power returns. (See Resetting
ATX Motherboards.)
How to control it
How it works
Three Port & Eight Port models
are also available.
SPECIFICATIONS
SINGLE PORT REMOTE REBOOT CONTROLLER (SP-RRC) Item No SWTSPRRC Price $135.00 Also Available Item No SWT3PRRC (3 Port) Price $195.00 Item No SWTMPRRC (8 Ports) Price $325.00 Physical 4.5" W x 3" D x 1.25" H, 1 lb. Connectors (2) RJ-11 TelCo LEDs (3) Power, Mode Switches (1) 4-Bit Dip, (1) Pushbutton Bell None Cable (1) 5' RJ-11 Phone Cable Adaptor None AC Power Wall Mount 9VAC 1A, 115V/60Hz NOTE: For 220V/50Hz, add (-INT) to the Item No ------ NON-ADDRESSABLE BASE UNITS ------ OPTIONAL INTELLIGENT AC POWER STRIP 2 Controlled and 4 "Normal" Outlets Item No SWTAC6-A2-2x4 Price $ 89.00 4 Controlled and 2 "Normal" Outlets Item No SWTAC6-A2-4x2 Price $ 89.00 6 Controlled Outlets Item No SWTAC6-A2-6x0 Price $ 89.00 Physical 12" W x 2.5" D x 1.5" H, 2 lbs. Connectors (2) RJ-11 TelCo/Control, (6) AC Receptacles LEDs (1) Surge Protection Switches (1) Main Toggle On/Off Bell None Cable (1) 5' RJ-11 Phone Cable Adaptor None AC Power 115V/60Hz, 15 Amps NOTE: For 220V/50Hz, see the IPC. OPTIONAL INTERNATIONAL POWER CONTROLLER (IPC) See the IPC OPTIONAL PC-RJ CABLE INTERFACE ASSEMBLY Item No CAPC2-RJ Price $ 15.00 Physical 5.5" W x 2.5" D x .75" H, .25 lbs. Connectors (1) RJ-11 Interface, (4) PC Headers Pins LEDs None Switches None Bell None Cable (1) 2' M/F Reset Switch Cable, (1) 2' F/F Motherboard Reset Cable, (1) 5' RJ-11 Cable Adaptor None AC Power None OPTIONAL RELAY BOX See the Relay Box -------- ADDRESSABLE BASE UNITS -------- OPTIONAL A/B, MATRIX or X2 SWITCH See the AB-M OPTIONAL INTELLIGENT AUTO PUSH BOARD (I-APB) See the APB OPTIONAL INTELLIGENT POWER NODE (IPN) See the IPN | |||||
Computer Peripheral Solutions, LLC © Copyright 1996-2012 Computer Peripheral Solutions, LLC |