MULTI-PURPOSE RS-232 SYNC or ASYNC SIGNAL DRIVER | ||||||||||||||||||||||||||||||||||||||||||||
APPLICATION DIAGRAM
| ||||||||||||||||||||||||||||||||||||||||||||
DESCRIPTION
The TB-32 is a general purpose RS-232 signal driver that can be used for a
variety of RS-232 synchronous or asynchronous applications. It incorporates
CPS's exclusive Super Serial Driver (SSD) that can drive the RS-232 signals up
to 1500' when used in conjunction with other CPS products that employ the same
driver. See SSD-32.
It may be used in pairs similar to short range modems, but with 11 conductor
cable, at distances of up to 2000+ feet. It can also be used as a stand-alone
product in the middle of a synchronous or asynchronous RS-232 line to clean up and
regenerate the appropriate RS-232 DCE and DTE signals.
In addition to signal regeneration, for synchronous applications, the TB-32 has
a phasing buffer that will re-phase the clock and data signals as they pass
through the unit. The loss of synchronization between the clock and data
signals is the major factor contributing to cabling restrictions on higher
speed concatenated RS-232 synchronous terminal networks.
USE ON THE FOLLOWING RS-232 NETWORKS
SPECIFICATIONS TB-32 Item No CETB2 Price $159.00 Physical 3.5" W x 4" D x 1" H, 1 lb. Connectors (1) DB-25 Female, (1) DB-25 Male LEDs (4) Power, Data, Clock Switches None Bell None Cable None Adaptor None AC Power Wall Mount 9VAC 1A, 115V/60Hz NOTE: For 220V/50Hz, add (-INT) to the Item No | ||||||||||||||||||||||||||||||||||||||||||||
Computer Peripheral Systems, Inc. © Copyright 1996-2003 Computer Peripheral Systems, Inc. |